Sectors: Oil & Gas ┬À Energy ┬À Manufacturing ┬À Chemical ┬À Pharma ┬À Data Centres
Products without engineering are hardware without purpose. Fireworld Safety Systems is a technically accountable engineering partner that designs, installs, commissions, verifies, inspects and trains across the full lifecycle of every system we deliver.
Process Hazard Studies
HAZOP ┬À LOPA ┬À QRA
- HAZOP facilitation: process and procedure reviews
- Layer of Protection Analysis (LOPA)
- Quantitative Risk Assessment (QRA)
- Fire and Explosion Hazard Assessment (FEHR)
- Bow-tie risk analysis and barrier assessment
- SIL target determination per IEC 61511
- ATEX zone classification survey and drawing
System Design & Engineering
Functional Safety ┬À ATEX ┬À Fire Protection
- Safety Requirements Specification (SRS) development
- SIL verification and Functional Safety Assessment (FSA)
- Cause-and-effect matrix development
- Fire hydraulic design: sprinkler, foam, suppression
- Gas detector placement study (CFD-assisted)
- Electrical ATEX equipment selection and specification
Installation & Commissioning
Certified Technicians ┬À FAT / SAT
- Mechanical and electrical installation, all fire and safety systems
- Factory Acceptance Testing (FAT) at supplier works
- Site Acceptance Testing (SAT) and loop checking
- Suppression system commissioning: flow test, weigh-in
- Room integrity test (blower door): BS EN 15004 / ISO 14520
Inspection & Maintenance
PPM ┬À NFPA 25 ┬À Regulatory Compliance
- Planned preventive maintenance (PPM) contracts
- Annual fire detection and suppression inspection
- Gas detector calibration and bump test programmes
- Cylinder weighing, hydrostatic test and recharge
- SIL proof test programme management
- 24-hour emergency call-out and breakdown response
Training & Competency Development
NEBOSH ┬À Drager-Certified ┬À NFPA
- Fire safety awareness and evacuation warden training
- SCBA operation and drills
- Gas detector operation and calibration training
- Emergency Response Plan drills and simulation
- Confined space entry and gas testing procedure training
- CPD programmes for client EHS engineers
IoT & Remote Monitoring
Cloud ┬À SCADA ┬À Predictive Analytics
- IoT safety sensor networks with cloud dashboards
- 24/7 remote alarm monitoring: GSM/LAN/satellite
- Predictive maintenance analytics: sensor health trending
- SCADA integration: OPC-UA, Modbus, BACnet
- Safety system KPI dashboards for EHS management
- OT cybersecurity: IEC 62443 compliant architecture
Fire & Risk Assessment Audits
Compliance Audits · Insurance & Regulatory · Gap Analysis
- Fire risk assessment to BS 9999 / Regulatory Reform (Fire Safety) Order principles
- NFPA-aligned facility compliance audit with corrective-action register
- Means-of-escape, compartmentation, signage, and emergency-lighting audits
- Insurance pre-survey and re-survey support; remediation roadmap
- ISO 45001 / ISO 14001 fire-safety element audit for management systems
- Existing-facility gap analysis: current state vs design intent vs current code
- Detailed audit report with risk rating, prioritised actions, and budget estimates
